You have to do your own materials list. Please don’t send us your over-all deck dimensions and ask us to do the material take-off for you – we  have neither the time nor the manpower to do this for you, and we won’t take the responsibility for the adequacy of our calculations.  If you can’t figure out your material requirements on your own from the following guidelines then it’s time to get some help on a more professional level. Click here for Guidelines  to calculate material quantities.

Note: Our minimum order is $3000 of material. Low budgets or small orders are not welcome. No pleading; no special causes. We're just not interested.

To fill out a Request-for-Quotation form click here.

 

Redwood

Dark Mahogany

Cedar

Yellow Pine

Beige Oak

White

Blue Gray

_____Premium Grade______   Most realistic surface textured boards anywhere. No sheen. Color variations among 2x stock adds realism to finished product. (See the Mattson project.)

Standard lengths are 8, 10 & 12 ft. only.
No long lengths.

____Above Standard Grade___

 

Mottled low-sheen surface.
Good for carving, routing and exposing ends.

This grade is recommended for all railings.
The best uniform high-density interior,
the sharpest edges and the flattest surfaces
of any solid-plastic lumber available anywhere.

(See the Taxera project.)

Standard lengths 8, 12, 16 & 20ft. 

Add 5% charge for lengths longer than 20ft.

For special lengths, minimum 50 pieces.

______Standard Grade______

 

Most economical.

Mottled low-sheen surface.
Possible voids throughout solid center.
Standard has grained embossing on one face.
(See the Cruz or Huss-Thomas project)

Standard lengths 7 to 16 ft in 1-ft increments.

Add 5% charge for lengths 17 ft to 30 ft.

For special lengths, minimum 50 pieces.